ok this is my first ever step-by-step tutorial for a diy project so bare with me. {ps there will be a lot of pictures for this tutorial. mainly because i am a visual learner so i hope it helps you too} also, i did this bunting for a bachelorette party but you can replace my supplies with any other color or fabric that will suit your festivity.
lets get started...
first you will need ribbon {i did 5 yards of ribbon}, fabric, & trim. for this bunting i chose the following...
i did not include a photo of this but you will need to cut out your triangles from your fabric. i didn't measure the triangles..just eyeballed it.
next you will need to fold your ribbon {as you go}
place is under your foot {of your sewing machine that is lol} and place the needle down into the folded ribbon. i didn't measure it but you'll want the threading to be around where mine is.
sew a few lines into the ribbon to get it seamed together. then place your flag all the way into the fold of the ribbon.
go ahead and sew the seam w/ the flag all the way through {make sure you are holding onto the ribbon like you see in the picture} i don't really like using pins thats why i just hold onto it instead.
and there you have it
next is the trim. with this you'll want to place the needle in the current seam of the trim & sew along that. also, place the trim right above the bottom of the ribbon that you can see both.
and voila!
here would be the finished project
HAPPY BUNTING!
No comments:
Post a Comment
what-cha thinkin'?